Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
63
• Support Name
the name of the individual within your company to contact for RMU or library support
• Support Phone
the phone number of the individual within your company to contact for RMU or library support
• Support Email
the email address of the individual within your company to contact for RMU or library support
Figure 3.28 ETERNUS LT40 S2: Configuration, User page
3.5.6.7 Setting Date/Time
This page allows the user to set the time and date, and how it will be displayed.
• Time (24H)
Enter the current time. Using the 24-hour format, 1:00 pm would be 13:00:00 (HH:MM:SS).
• Date
Enter the current date.
Clock Synchronization Configuration
• Enable Clock Synchronization
Click to enable or disable the SNTP server. Click
Help
for further information.
• SNTP Server Address
Most NTP (Network Time Protocol) servers also support SNTP (Simplified NTP). Click
Help
for further
information.
• UTC Time Zone Offset
This shows current time zone selected. Select the zone for your location from the pull down list.
• Enable Daylight Savings Adjustment
Enabling Daylight Savings will advance the local time by one hour. Click
Help
for further information.
To Next Page
Loading...
