Chapter 3 Operating the Tape Library
3.2 Partitioning the Library
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
43
3.2.2.4 Configuration of a 2-Partition-System
Must have at least two drives installed. One drive must be installed in either drive position 1 or drive position
2, and another drive must be installed in either drive position 3 or drive position 4. Partition 1 will contain any
drives in drive position 1 and drive position 2. Partition 1 will also contain magazine 1 and magazine 2.
Partition 2 will contain any drives in drive position 3 and drive position 4. Partition 2 will also contain
magazine 3 and magazine 4.
Showing drive numbers (1,2,3,4) element addresses (El.Adr.) and correlated magazines (same color)
3.2.2.5 Configuration of a 3-Partition-System
Must have at least three drives installed. A drive must be installed in drive position 1, another drive must be
installed in drive position 2, and another drive must be installed in either drive position 3 or drive position 4.
Partition 1 will contain the first drive and the first magazine. Partition 2 will contain the second drive and the
second magazine. Partition 3 will contain any drives in drive position 3 and drive position 4. Partition 3 will
also contain magazine 3 and magazine 4.
Showing drive numbers (1, 2, 3, 4) element addresses (El.Adr.) and correlated magazines (same color).
To Next Page
Loading...
