Fujitsu fi-8190

Operation Description Setting Item User
Menu
Administ
rator
Menu
○: Available
—: Not Available
17: Manual Feed
Timeout
— ○
18: Paper Protection — ○
19: Vertical streak
detection
— ○
20: Prioritize panel
settings
— ○
21: Ope. Panel
Initialization
— ○
22: Power saving — ○
23: Power-off time — ○
24: Pre-pick — ○
25: USB — ○
Cleaning the scanner You can clean the scanner by using Cleaning
Paper, Cleaning Wipe, or cloth.
For more details, refer to Daily Care (page
214).
3: Cleaning ○ ○
Test print for
Imprinter
You can run a test print when the imprinter
is installed.
For more details, refer to the fi-819PRB
Imprinter Operator's Guide.
4: Test Print ○ ○
Checking and
Clearing the
Consumable Counters
You can check the replacement cycle of the
consumables and the total page count.
Also use it to clear the counter when you
have replaced the consumables or
performed cleaning.
For more details, refer to Checking and
Clearing the Consumable Counters (page
157).
5: Consumable
counters
○ ○
Counting documents You can count the number of sheets
scanned.
For more details, refer to Document Count
(page 159).
13: Doc Counting
Mode
○ ○
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
148