Fujitsu fi-8190 - Processing a Job (with Paperstream NX Manager) [Fi-8190;Fi-8290;Fi-8170;Fi-8270]

Processing a Job (With PaperStream NX Manager) [fi-8190/fi-8290/fi-8170/
fi-8270]
This section explains about the basic flow of starting a scan by processing a job set in PaperStream NX Manager.
To process a job with the scanner, you need to set up an environment and configure the settings for PaperStream
NX Manager.
For details, refer to the PaperStream NX Manager User's Guide.
1 Turn on the scanner.
For details, refer to How to Turn the Power ON (page 72).
● When the [Job Group Code] screen is displayed on the LCD
Proceed to step 2.
● When the [Job list] screen is displayed on the LCD
Proceed to step 3.
HINT
Press the [Stop/Clear] button while the [Job list] screen is displayed to log out and connect to the server
again.
How to Perform a Basic Scan
106