Fujitsu fi-8190

Maintenance
Admin Password
Change or disable the administrator password.
Specify whether or not to disable the administrator password depending on the operation.
Change the administrator password regularly.
Click [Admin Password] under [Maintenance] to display the window.
Current Password
Enter the current password.
The factory default of the password is "password".
New Password
Enter a new password within 16 characters to change the current password.
The following characters can be used for a new password:
● Alphanumerical characters
● Space
● Symbols
-/:;()
&@".,?!'#%^*+=_|~<>$[]`{}
● Diacritics
èéêëÈÉÊËùúûüÙÚÛÜìíîïıÌÍÎÏİòóôõöœÒÓÔÕÖŒàáâãäæÀÁÂÃÄÆşŞğĞçÇßñÑ
Confirm New Password
Re-enter the password entered for [New Password] for confirmation to change the current password.
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings) [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250]
415