Scanning Documents Folded in Half
Pressing the [Manual Feed] button to switch the feed mode to Manual Feed Mode allows you to scan a document
folded in half (a document of up to A3 or Double Letter in size with a thickness of 64 to 105 g/m
2
[17 to 28 lb]) as it
is.
1 Fold the document in half so that the sides to be scanned are facing out.
Fold it firmly and smooth out any creases.
ATTENTION
The document may be fed skewed if the folded part is too thick.
Example
2 Load the document folded in half in the ADF paper chute (feeder).
Various Ways to Scan
181
To Next Page
Loading...
