Fujitsu fi-8190

Scanner Code
Specify whether or not to issue a scanner code.
If the "PaperStream NX Manager" setting is enabled, a scanner code can be used when scanning with a user
application on a computer/mobile device/thin client.
Click [Scanner Code] under [Network] to display the window.
Scanner Code
Enter a scanner code within 64 characters.
The following characters can be used for a scanner code:
● Alphanumerical characters
● Space
The space before or after the character string is ignored.
● Symbols
-/:;() &@".,?!'#%^*+=_|~<>$[]`{}
● Diacritics
èéêëÈÉÊËùúûüÙÚÛÜìíîïıÌÍÎÏİòóôõöœÒÓÔÕÖŒàáâãäæÀÁÂÃÄÆşŞğĞçÇßñÑ
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings) [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250]
407