Fujitsu fi-8190

Configurable Items in the Settings Menu
Setting Item Description Parameter(*1)/Value Factory Default
(*2)
- : No parameters/values
Guidance Displays the way to clear the page counter. 1:Clear counter 1:Clear counter
Information [Information] appears as an item in the
[Settings Menu] screen that is flashing on
and off, only if is flashing on the
LCD.
Message for replacing
consumables/cleaning/
glass cleaning/regular
maintenance
Only displayed when
there is information
1:Scanner
Information
Displays the scanner information such as
the scanner name and network
information.
1:Scanner
2:Network
3:Server
—
2:Pick Speed You can specify the timing of when
document feeding is started.
When overlapped documents or paper
jams occur frequently, delaying the timing
of document feeding may improve the
performance.
This setting is effective when you scan thin
paper.
It can also be configured in the Software
Operation Panel.
1:Normal
2:Slow
1:Normal
3:Cleaning Use this setting when you clean the
scanner.
For more details, refer to Daily Care (page
214).
1:Cleaning Paper
2:Roller Wipe
—
4:Test Print Use this option to run a test print when the
Imprinter is installed.
For more details, refer to the fi-819PRB
Imprinter Operator's Guide.
No. of sheets scanned:
1:Single sheet only
2:Multiple sheets
Print Pattern:
1:
(L)ABCDEFGHIJKLMNOPQR
STUVWX
YZ[ ]^_`00000000
2:
(L)abcdefghijklmnopqrstu
vwxyz{|}¯00000000
(*3)
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
161