Cleaning the Outside of the Scanner
The scanner including the ADF paper chute (feeder) and the stacker should be cleaned with either a piece of
dry cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe.
ATTENTION
● To avoid deformation and discoloration, never use paint thinner or any other organic solvents.
● Be careful not to let any moisture or water inside the scanner during cleaning.
● It may take a long time to dry if an excessive amount of Cleaner F1/mild detergent is used. Use only a
small amount. Wipe off the cleaner completely to leave no residue on the cleaned parts.
● For fi-8190/fi-8170/fi-8150/fi-8150U
Daily Care
217
To Next Page
Loading...
