Fujitsu M10 User Manual

FRONTFRONT
A
B
Figure 3-30
Mounting the chassis in the rack
8.
Attach the cable management arm (referred to below as CMA).
The work of attaching the CMA is as viewed from the rear of the rack.
a. Slide to remove the bracket marked "CMA Release For ..." from the CMA, and
insert it into the
slide rail along the grooves on the left side of the chassis.
Figure 3-31
Attaching the bracket
b. Insert the smaller bracket (C in Figure 3-32) on the tip of the CMA into the
right-edge clip portion (A in Figure 3-32) of the inner rail on the right side of
the chassis.
c. Insert the larger bracket (D in Figure 3-32) on the tip of the CMA into the right
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015100

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English