Fujitsu M10 User Manual

XSCF>

console

-p

0
Console

contents

may

be

logged.
Connect

to

PPAR-ID

0?[y|n]

:
y

[Enter]

key
{0}

ok
{0}

ok

#.
exit

from

console.
XSCF>
XSCF>

poweroff

-a
PPAR-IDs

to

power

off

:00,01
Continue?

[y|n]

:
y
00

:

Powering

off
01

:

Powering

off
*Note*
This

command

only

issues

the

instructi on

to

power-off.
The

result

of

the

instruction

can

be

checked

by

the

"showpparprogress".
XSCF>

showpparprogress

-p

0
PPAR

Power

Off

PPAR#0

[

1/

3]
CPU

Stop

PPAR#0

[

2/

3]
PSU

Off

PPAR#0

[

3/

3]
The

sequence

of

power

control

is

completed.
XSCF>
6.
Press the [Enter] key. Then, press the [#] (default value for the escape
symbol) and [.] (period) keys to move from the console to the XSCF shell.
7.
Execute the poweroff command to stop the physical partition.
8.
Execute the show pparprogres s command, and confirm that the command
displays "The sequence of power
control is completed." and ends.
Oracle Solaris is preinstalled on the SPARC M10 system. According to the purpose,
either use the preinstalled Oracle Solaris as is or reinstall it.
To reinstall Oracle Solaris, install the latest Oracle VM Server for SPARC. For the
latest information on the supported Oracle Solaris versions and
SRU, see the Fujitsu
M10/SPARC M10 Systems Product Notes.
Chapter 7 Making the Initial System Settings 225

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English