Fujitsu M2010 - Connecting External Devices

Connecting external devices
Connecting external devices
Always refer to the s afety information provided in "Important notes", Pa ge 4 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or d isconnect cables during a thunderstorm.
Never pull a t a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when connecting or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices re quire special d rivers (see the operating
system and external d evice documentation).
Connecting devices to the notebo ok
1. Turn off your notebook and all external devices.
2. Unplug your notebook and a l
l devices from the mains sockets.
3. Connect the cab les for your external devices following th e instructions.
4. Plug all power cables into t
he ma ins sockets.
DevicesPeripheralde
vices
Disconnecting devices from the noteb oo k
1. Turn off your notebook and all external devices.
2. Unplug your notebook and a ll dev
ices from the mains sockets.
3. Disconnect the cables for y our external devices following the instructions.
DevicesPeripheraldevices
A26391-K245-Z220-1-7619, edition 1 33