Fujitsu M2010 User Manual

Troubl eshooting and tips
The external monitor is blank or
the image is unstable
ScreenMoni tor
Cause Troubleshooting
The wrong external monitor has been
selected
or the w rong screen resolution has b
een set for
the application pro gram.
► Terminate the application program
in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after closing the p
rogram,
switch over to the notebook’s inte
rnal LCD
screen with
Fn
+
F10
. Change the
following setting:
► Set the screen resolution: Select the
required resolution with Startsymbol –
(Settings) – Control Panel – Appearance a nd
Personalization – Personalization: Adjust th e
screen resolution as required.
► Select monitor: Right-click o
n the desktop.
Under Personalization – Dis
play Settings
choose monitor 1 or 2 and und
er Advanc ed
Settings – M onitor choose t
he correct monitor.
The notebook cannot be started
Notebook
Cause Troubleshooting
The battery is not installed c orrectly.
► Switch the notebook off.
► Check whethe r the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
The power adapter is not connected correctly.
► Switch the notebook off.
► Check whether th e mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
A26391-K245-Z220-1-7619, edition 1 49

Fujitsu M2010 Specifications

General

Brand	Fujitsu
Model	M2010
Category	Laptop
Language	English