Fujitsu M2010 - Notes on Installing and Removing Boards and Components; Removing and Installing Components During Servicing

Removing and installing components
during servicing
Removing and installing compo
nents
during servicing
Only qualified technicians should repair your notebook. Unauthorised
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Components
Serv icin g
If you remove and install components without consulting the Hotline/Help
Desk, t hen the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pull the power plug out of the mains socket.
• Always remove the battery.
• Ta ke care when you use the locking mechanisms on the battery and any other component.
• Never use sharp objects such
as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Remove the power plug from the m ains supply before inserting or removing
boards containing ESD s.
• Always hold boards with ESDs by their edges.
• Never t ouch pins or conductors on boards fitted with ESDs.
A26391-K245-Z220-1-7619, edition 1 37