EasyManua.ls Logo

Fujitsu M2010 - The External Monitor Remains Blank; The LCD Screen Is Difficult to Read; The Notebooks LCD Screen Remains Blank; When Certain Characters Are Entered on the Keyboard, Only Numerals Are Written

Fujitsu M2010
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting and tips
When certain characters are ent
ered on the
keyboard, only numerals are written
Abeep sou ndsevery second
Cause Troubleshooting
The virtual numeric keypad of you
r device is
activated, see "
Virtual numeric
keyp ad", Page 16
Press the ke y c ombination
Fn
+
Num
.
The notebook’s LCD screen remains blank
LCDscreenLCDscreenistoodark
Cause Troubleshooting
Monitor is switched off.
Press a key or touch the touchpad .
External monitor or television set connected. Press the key combination
Fn
+
F10
(switch screen output).
The LCD screen is difcult to
read
LCDscreenLCDscreen
Cause Troubleshooting
Reected glare Turn the notebook or alter the tilt of the LCD
screen.
Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause Troubleshooting
Monitor is switched off. Switch the external monitor o
n.
Power saving has been activated (monitor is
blank).
Press any key to continue.
Brightness is set to dark.
Adjust the brightness of the monitor.
Screen output is set to the no
tebook’s LCD
screen
Press the key combination
Fn
+
F10
(switch screen output).
The external monito r’s powe
r cable or data
cable is not connected prope
rly.
Switch off the external mo nitor and the
notebook.
Check whether the pow er cable is plugged
properly into the external monitor and into
the power socket.
Check whether the data cable is pro perly
connected to the no tebook and the external
monitor (if it is plugged in with a connector).
Switch on the external monitor and the
notebook.
48 A26391-K245-Z220-1-7619, edition 1

Table of Contents

Related product manuals