36
Chapter 1 Overview
3 Place the CD-ROM at the center of the tray.
While supporting the CD-ROM tray, push the tray until it clicks into position.
If the CD-ROM is placed improperly when the tray is pushed into the unit, the CD-ROM or the
drive may be damaged.
Be careful not to touch the lens of the CD-ROM drive.
4 Move the tray back.
Push the tray gently until it clicks into position.
■ Ejecting the CD-ROM
To eject the CD-ROM, press the CD-ROM eject button (EJECT) in the same way as steps 1 to 2 in
"
■ Inserting the CD-ROM" (pg.35).
CD-ROM tray
Label side up
CD-ROM tray
To Next Page
Loading...
Need help?
General