RX300 S3 Operating manual 33
4 Hardware Installation
V CAUTION!
Please note the safety instructions in chapter “Important Notes” on
page 23.
Do not expose the server to extreme environmental conditions (see
section “Technical Data” on page 18). Protect it from dust, humidity, and
heat.
Never expose a HDD module to a temperature shock (see section
“Handling Hard Disk Drives/HDD Modules” on page 77).
Avoid the formation of condensation inside and on the outside of the hard
disk drives before setting up the server must be acclimatized in its
operating environment for an acclimatization time (table 3).
I The temperature difference in table 3 represents the difference between
the operating temperature and the external, transport or storage
temperature.
Temperature difference (°C)
(operating environment/outside temperature)
Minimum
acclimatization time
(hours)
53
10 5
15 7
20 8
25 9
30 10
Table 3: Acclimatization time
To Next Page
Loading...
