Fujitsu Primergy RX300 S3 Operating Manual

RX300 S3 Operating manual 61
Preparation for Use and Operation Configuring the Server
5.3.2 Configuration without ServerStart
Configuring IME (RAID Level 1)
The server is equipped with an onboard SAS controller with Integrated Mirroring
Enhanced functionality.
I To configure Integrated Mirroring Enhanced the controller has its own
RAID-Select Utility. For further information see “Integrated Mirroring
User’s Guide“ on the ServerBooks DVD (choose Controllers from the
menu).
Configuring the onboard SAS controller with RAID functionality
You will find a description of the onboard SAS controller configuration in the
Technical Manual for the system board (see “Related Publications” on
page 103).
The configuration of the RAID functionality will be accomplished with the GAM
(Global Array Manager).(see “Related Publications” on page 103)
Configuring the PCI RAID controller
If your server is fitted with a PCI RAID controller, you must configure it as
described in the related documentation.
Installing the operating system
Ê Insert the installation media ofthe operating system you want to install in the
corresponding drive.
Ê Reboot the server.
Ê Follow the instructions on the monitor and in the manual for the operating
system.
If your server is equipped with a RAID controller, please read how to install the
desired operating system in the related manual.

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g