44 Operating manual RX300 S3
Connecting Devices to Server Hardware Installation
4.3 Connecting Devices to Server
The ports for external devices are on the rear of the server. Which additional
ports are available on your server depends on the options and/or the PCI boards
installed.
The standard ports (figure 10) are marked with symbols, and some are color-
coded.
Figure 10: Ports and connectors
I Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê Connect the data cables to the server and peripherals.
1 Mouse port (PS/2) (green) 5 USB port 1 and 2 (black)
2 LAN port 2 (10/100/1000 MBps) 6 Serial port COM1 (turquoise)
3 LAN port 1(10/100/1000 MBps) 7 Keyboard port (PS/2) (purple)
4 Monitor port (VGA) (blue) 8 Power supply connectors
1
2
76 5 4 3
8
LAN 1 LAN 2
LAN 1
LAN 2
+
+
To Next Page
Loading...
