Fujitsu Primergy RX300 S3 - Indicators on the Hot-Plug CPU and System Fans

RX300 S3 Operating manual 57
Preparation for Use and Operation Operating and Indicator Elements
Indicators on hot-plug power supply unit
5.1.3 Indicators on the hot-plug CPU and System Fans
For each CPU/system fan a bicolor status indicator (LED on the system board)
is assigned. These status indicators are visible only with open housing. The
respective LED is set via commands in the server management.
Power
indicator
(6)/(green)
Error
indicator
(5)/(orange)
Status description
does not
light
does not
light
Device switched OFF.
lights does not
light
Device operating.
PCI slot powered up.
Table 6: Operating system without hot-plug functionality: hot-plug PCI indicator modes
LED Color State Meaning
7 Operation orange ON Line Voltage OK (standby mode)
green ON Server operating
8 Diagnosis orange ON PSU prefailure
ON/OFF PSU fail
LED Meaning
green lights fan operating
orange lights fan prefailure message
flashes fan is defective