Fujitsu Primergy RX300 S3 - The Rear Side

54 Operating manual RX300 S3
Operating and Indicator Elements Preparation for Use and Operation
5.1.2 The Rear Side
Figure 17: Connection panel: indicators
Indicators on the connection panel
1 - 4: Indicators on the connection panel (see page 54)
5, 6: Indicators on the hot-plug PCI slots (see page 56)
7, 8: Indicators on the hot-plug PSU (see page 57)
1 Global Error indicator (orange)
Does not light when the system is ok. No service incident or critical event
has occurred.
Lights orange when a prefailure event has been recognized. Users can
check system- and eventlog or via ServerView for event details.
Flashes orange when a critical event has occurred. Users can check
BIOS Setup, system- and eventlog or via ServerView for event details.
If the event is still acute after a power failure, the indicator is activated
after the restart.
LAN 1 LAN 2
LAN 1 LAN 2
+
+