RX300 S3 Operating manual 55
Preparation for Use and Operation Operating and Indicator Elements
2 ID indicator (blue)
Lights blue when the system has been selected by pressing the ID
button on the front. To deactivate, press the button again.
The ID indicator on the front also lights up at the same time. The two ID
indicators are synchronized.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
3 LAN transfer rate indicator (bicolor)
Lights orange for a LAN transfer rate of 1 Gbps.
Lights green for a LAN transfer rate of 100 Mbps.
Does not light for a LAN transfer rate of 10 Mbps (or there is no LAN
connection available).
4 LAN active indicator (green)
Lights green when a LAN connection is available.
Does not light when there is no LAN connection available.
Flashes when a LAN transfer occurs.
To Next Page
Loading...
