Fujitsu Primergy RX300 S3 - Replacing the Fan

RX300 S3 Operating manual 89
Hot-plug Components Hot-plug Fans
8.3.1 Replacing the Fan
Ê Remove the housing cover (see section “Opening/Closing the Housing” on
page 95).
Figure 28: Arrangement of the fans
Ê Identify which fan is defective by the LED 19-24 (lights/flashes orange).
Figure 29: Removing fan
Ê Pull the green handle in the direction of the arrow (1) and disengage the
locking mechanism.
Ê Remove the fan from the cartridge (2).
Fan 4 CPU
Fan 5 CPU
Fan 6 CPU
Fan 2 sys
Fan 1 sys
Fan 1 CPU
Fan 2 CPUFan 3 CPU
L23
L24
L21
L22
L27
L28
L25
L26
Front