7.5 Popup Message
7-18
Message not chosen for display
received; it is a local 00 message.
Choose “All Message”(LIST menu)
to display.
In reception on the local frequency;
1. When “Alarm Message (A/B/D/L)” is selected on the
[LIST] menu and an emergency message (ID = xx00) other
than an alarm message is received.
2. When “Nondisplay” is selected for the station or received
message in “[MENU] -> Display -> User Select Station &
Msg” and “User Select Message” is selected on the [LIST]
menu and when an emergency message (ID = xx00) is
received.
3. When “Good Message” is selected on the [LIST] menu and
an emergency message (ID = xx00) with the error rate of
4 % to 33 % is received.
Note:
To display the received message, select “All Message” on
the [LIST] menu.
Int’l message not chosen for display
received.
Choose “All Message” (LIST menu)
to display.
In reception on the international frequency;
When a message selected in the setting of “[MENU] ->
NAVTEX -> Rcv Mask” is received.
1. When a message other than an alarm message is received
when “Alarm Message” is selected on the [LIST] menu.
2. When “User Select Message” is selected on the [LIST]
menu and a message is received for which “Nondisplay” is
selected on the station or received message in “[MENU] ->
Display -> User Select Station & Msg”.
3. When “Good Message” is selected on the [LIST] menu and
a message with the error rate of 4% to 33% is received.
Note:
To display the received message, select “All Message” on
the [LIST] menu.
Local message not chosen for
display received.
Choose “All Message” (LIST menu)
to display.
In reception on the local frequency;
When a message selected in the setting of “[MENU] ->
NAVTEX -> Rcv Mask” is received.
1. When a message other than an alarm message is received
when “Alarm Message” is selected on the [LIST] menu.
2. When “User Select Message” is selected on the [LIST]
menu and a message is received for which “Nondisplay” is
selected on the station or received message in “[MENU] ->
Display -> User Select Station & Msg”.
3. When “Good Message” is selected on the [LIST] menu and
a message with the error rate of 4% to 33% is received.
Note:
To display the received message, select “All Message” on the
[LIST] menu.
To Next Page
Loading...
