7.5 Popup Message
7-19
Table 7.5.2 Printer and Battery error popup list
Printer & battery error popup Description
Printer error
Printer error
Displayed when paper runs out or the printer door is open.
Related setting; Printer setting
[MENU] -> System -> Printer
Battery error
Displayed when the voltage of the backup battery of the CPU
board goes down below +2.5 VDC. The Status field of the
received message shows
mark.
To check the battery voltage, execute “[MENU] -> Service ->
Test”.
Table 7.5.3 Popup list for each menu
Popup list for each menu Applicable menu
Restore default settings ? [MENU] -> Service -> Default Setting
Start test ? [MENU] -> Service -> Test
Delete all message ? [MENU] -> Initialize1 -> Delete All Msgs
Clear all settings ? [MENU] -> Initialize1 -> All Clear
View nav data ? [MENU] -> Initialize1 -> View Nav Data
Display system test results ? [MENU] -> Initialize1 -> System Test Results
Adjust Rx unit ? [MENU] -> Initialize1 -> Adjust Rx Unit
Start Rx test ? [MENU] -> Initialize1 -> Rx Test
Start serviceman test ? [MENU] -> Initialize2 -> Serviceman Test
Fill Rx memory with test message ? [MENU] -> Initialize2 -> Fill Memory
Note:
When “NX-700A, Upright, or Inverted” is selected in the setting of “[MENU] -> System
-> Printer”, a message “Print will be canceled” is added.
Table 7.5.4 Edit station list menu popup list
Popup Message in Edit Station List menu Applicable menu
Delete Station ? [MENU] -> Service -> Edit Station List
Save new station ? [MENU] -> Service -> Edit Station List
Save new station ? [MENU] -> Service -> Edit Station List
Edit ID data. [MENU] -> Service -> Edit Station List
Exit without saving ? [MENU] -> Service -> Edit Station List
Save station ? [MENU] -> Service -> Edit Station List
To Next Page
Loading...
