Futurecom VR - Page 108

8G093X01 R5
VR Programming Guide
August 2022 Page 108 of 144
Field Name
Range
Description
Notes
Portable Ack
Required
Enable / Disable
Check box
Enables / Disables the sending of
low level Ack by the VR to the PSU
upon receipt of an Emergency
Alarm.
The Emergency Ack type
is sent by the VR
depending on its
programming – VR Ack /
Site (FNE) Ack or Console
Ack.
Default setting is Enabled.
TG1 Translation
Enabled
Enable / Disable
Check box
When enabled and a PSU
emergency is received (on default
TG1), the VR translates the TG ID
to match the currently selected
MSU TG ID. This way the
emergency is announced on the
selected MSU TG, not on TG 1,
which may not exist in the specific
Trunking system.
Applicable to Fireground
Analog, Mixed and TPS
type VR channels.
Switch VR from
LOC to SYS if MSU
in Emergency
Enable / Disable
Check box
When the VR is in the LOC mode
and the user presses the
Emergency button on the MSU CH
the VR will switch from LOC to SYS
mode when this option is enabled
(box is checked). If the option is not
enabled, the VR stays in LOC
mode after Emergency is declared
on the MSU.