Allows the user to start an automated test
that defines the Primary/secondary
boundary for a desired coverage area.
Test involves two VRs located at the
boundary of the desired primary/secondary
coverage area and engaged in Primary
Secondary interaction.
The primary and secondary VR both
interact with each other to determine the
Rx RSSI Threshold.
On completion of the test, a check mark is
placed beside Rx RSSI Thresh. and the
value for this field is modified in the
repeater channel setup window.
The test may fail if the levels are outside
the upper and lower limits of Rx RSSI
Threshold. If the test fails for the upper
limit, move the secondary VR away from
the primary and if the test fails for the lower
limit, bring the secondary VR closer to the
primary.
To Next Page
Loading...