8G093X01 R5
VR Programming Guide
August 2022 Page 32 of 144
c. If the connected repeater already has the exact same options in the license file,
FRC displays following error message
• If Repeater is disconnected after loading data into FRC, FRC will present a series of
error messages and then treat the session as an Offline editing session. New license
info will be applied locally (within the FRC session), and can be saved into a .DCD or
.DPD template for future use.
• If user now reconnects the repeater, the template can be applied to repeater via
Repeater → Save Changes to Repeater, the new license feature and corresponding
configuration will be applied to the repeater
To Next Page
Loading...