Futurecom VR - Page 86

8G093X01 R5
VR Programming Guide
August 2022 Page 86 of 144
Field Name
Range
Description
Notes
Mob. Det*
None
Zone # /
Channel #
Specifies the indexed
‘Item number’ (in the
Mobile Radio Channel
Setup screen) of the
MSU mode that the
Analog VR needs to
steer the MSU to when
executing the Mobile
Detector Function. The
indexed ‘Item number’
points to the Zone /
Channel that is
programmed as
Simplex only using the
original mode Tx
frequency.
*VRX1000 ONLY field
Requires the MSU to be programmed with extra
channels to execute the Mobile Detector function.
After programming the APX MSU DVRS operation and exporting the XML file using the Motorola
CPS, the data needs to be imported into the VR by using the Import → Motorola file function of
the Futurecom Repeater Configurator. Any change to the MSU programming may require
exporting and importing of a new XML file to update the VR programming personality to match
that of the MSU.