Futurecom VR - Page 85

8G093X01 R5
VR Programming Guide
August 2022 Page 85 of 144
Field Name
Range
Description
Notes
TDMA Ph2
Read Only
This field is extracted
during the “Import
Motorola XML File”
process.
Refers to Phase 2 type of TDMA MSU Mode
P25
Trunking
System
MSI
Non MSI 1
Non MSI 2
Non MSI 3
‘MSI’_ Default.
The VR sends the
‘Status’ received from
the P25 PSU to the
MSU without any
change.
‘Non MSI 1’ The VR
adds 1 to ‘Status’
received from the P25
PSU and forwards the
incremented ‘Status’ to
the MSU.
‘Non MSI 2’ reserved
for future use
‘Non MSI 3’ reserved
for future use
Applicable only to P25 Trunking Channels.
VRS-EP
Revert*
None
Zone # /
Channel #
If this field is set to
None there is no VRS-
EP Revert.
If this field is set to a
specific Zone /
Channel then when the
MSU is on this mode,
activating the Analog
VR will force the MSU
to revert to the Zone /
Channel programmed
in this field.
When the Analog VR is
deactivated, the MSU
goes back to the
original mode unless
the User manually
changes the selection
on the control head.
*VRX1000 ONLY field
Applicable only when VRS-EP is enabled.