Futurecom VR - Page 84

8G093X01 R5
VR Programming Guide
August 2022 Page 84 of 144
Field Name
Range
Description
Notes
VR Ch. All
Alwd.
Yes / No
This field specifies if
the user can select
from any VR channel
or from a limited list.
The list of selectable
VR channels is all VR
channels if this field is
configured Yes, but a
more limited set of VR
channels (as
configured in VR Ch.
List) if this field is set
to No.
If Rptr Independent
Channel Change is
Disabled, an MSU
TG/Channel change
will steer to the
programmed VR
channel, yet the user
may still be able to
subsequently select a
different VR channel
per restrictions limits
defined by this field
and VR Ch. List.
The Rptr Independent Channel Change Field is
found in the VR Common Setup window
Refer to Table 4 - Field Interactions Determining
VR Mode on Power Up
VR Ch. List
0 to max #
of
programmed
DVR
channels
Enables the selection
of which VR channels
are selectable when a
specific MSU TG /
Channel is selected on
the MSU CH.
Applicable only if the “VR Ch All Alwd” field is set
to “No”.
RCM (hex)
Read Only
This field is extracted
during the “Import
Motorola XML File”
process.
Sys.
Repeat
Read Only
This field is extracted
during the “Import
Motorola XML File”
process.
Non
ASTRO
Sign.
Read Only
This field is extracted
during the “Import
Motorola XML File”
process.
Frequency
Band
Read Only
This field is extracted
during the “Import
Motorola XML File”
process.
For APX 8500, this field is set to ’Multiband-InB’ or
“Multiband-XB’ depending on the DVR-MSU in-
band or Crossband Configuration
TDMA X2
Read Only
This field is extracted
during the “Import
Motorola XML File”
process.
Refers to X2 type of TDMA MSU Mode.