Garmin 5000 - Page 24

20 GPSMAP 5000 Series Owner’s Manual
Using Combinations
USinG
CombinationS
To customize the Combination screen:
1. While viewing a combinations screen, touch Menu > Change Combination.
OR
From the Home screen, touch Combinations > Unused Combo (if one is available).
Combination
screen 1
Combination
screen 2
Data bar
Select the number of
combination screens
Change
combination
screens
Turn the data bar
on or off
2. Customize the Combinations screen:
Touch Num Functions to change the number of combination screens (1-4).
Touch Layout to change to a vertical or horizontal layout.
Touch XM Bar to hide or show the XM bar.
Touch Data Bar to turn the data bar on the right side on or off.
Touch the screen buttons to change what is displayed on each of the screens.
3. Touch Done.
NOTE: When you select the combination screens to view, you are only able to choose from the options
available to your unit. You can increase the number of screens available by using a BlueChart g2 Vision
SD card and adding network devices, such as sonar and radar.
To add additional data elds:
1. While viewing the Combinations screen, touch an unused data eld.
2. Touch the Digital Item to be displayed on the Combinations Screen. Available options vary, based
on the unit and network conguration.
To edit an existing data eld:
While viewing the Combinations screen, touch a data eld. Touch the item to be displayed.
•
•
•
•
•
Change to vertical
or horizontal layout
Turn the XM bar
on or off
XM bar