Garmin 5000 - Page 35

GPSMAP
®
5000 Series Owner’s Manual 31
Viewing Information
VieWinG
information
2. Check your MapSource version on your PC by clicking Help > About MapSource. If the version
is older than 6.12.2, update to the most current version by clicking Help > Check for Software
Updates or check the Garmin Web site at www.garmin.com.
3. Insert the SD card into an SD card reader that is attached to the PC.
4. From within MapSource, click on Transfer > Send to Device.
5. From the Send to Device window, select the drive for the SD card reader and the types of data
you want to copy to your chartplotter.
6. Click Send.
7. Insert the SD card into your chartplotter.
8. From the Home screen on your chartplotter, touch Information > User Data > Data Transfer >
Card.
9. Touch Replace From Card or Merge From Card to copy or merge the data into your
chartplotter.
To transfer data (waypoints, routes, tracks) to or from an SD card:
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, touch Information > User Data > Data Transfer > Card.
Complete one of the following:
Touch Save To Card to save waypoints, routes, and tracks to the SD card.
Touch Merge From Card to transfer data from the SD card to the unit and combine it with
existing user data.
Touch Replace From Card to overwrite items on your unit.
To transfer data to or from a network:
1. Connect the unit to a Garmin Marine Network using the network port on the back of the unit and
a Garmin network cable.
2. From the Home screen, touch Information > User Data > Data Transfer > Network.
Complete one of the following:
Touch Clone User Data to transfer waypoints, routes, and tracks to the other chartplotters
connected to the network. Existing data is overwritten on those chartplotters.
Touch Merge User Data to transfer data between all the chartplotters connected to the
network. Unique data is combined with existing data on every chartplotter.
To back up data to a PC:
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, touch Information > User Data > Data Transfer > Card > Save to
Card.
3. Remove the SD card from the chartplotter and insert it into an SD card reader that is attached to
a PC.
4. From Windows Explorer, open the Garmin\UserData folder on the SD card.
5. Copy the UserData.ADM le on the card and paste it to any location on the PC.
To restore backup data to your chartplotter:
1. Copy the UserData.ADM le from your PC to an SD card in a folder named Garmin\UserData.
2. Insert the SD card into your chartplotter.
3. From the Home screen on your chartplotter, touch Information > User Data > Data Transfer >
Card > Replace From Card.
•
•
•
•
•