Gateway Convertible notebook User Manual

www.gateway.com
109
Adding or replacing memory
modules
Your convertible notebook uses memory modules called
SO-DIMMs (Small Outline Dual Inline Memory Modules). The
modules are available in various capacities and any module
can be placed in any slot.
To add or replace memory modules:
1 Follow the guidelines under “Preventing static
electricity discharge” on page 108.
2 Turn off your convertible notebook.
3 Make sure that he LCD panel is in notebook mode, then
close the LCD panel. For more information, see
“Converting from notebook to tablet mode” on page 42.
4 Disconnect from the optional port replicator.
5 Disconnect the AC adapter, modem cable, and network
cable, if they are connected to the convertible
notebook.
6 Disconnect all peripheral devices connected to the
convertible notebook and remove any PC cards.
Important
Use only memory modules designed for your Gateway convertible
notebook.
Tools
You need a small Phillips screwdriver to replace memory modules.
Memory bay

Gateway Convertible notebook Specifications

General

Brand	Gateway
Model	Convertible notebook
Category	Laptop
Language	English