www.gateway.com
121
Display
The screen is too dark
• Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see “Adjusting brightness” on page 45.
The screen resolution is not correct
• Change the screen resolution from the Display Settings
dialog box. For instructions on changing the screen
resolution, see “Changing the color depth and screen
resolution” in your online User Guide.
The text on the display is dim or difficult to read
• Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see “Adjusting brightness” on page 45.
• Change the display settings. For instructions on
changing the display settings, see “Changing screen
settings” in your online User Guide.
• Move your convertible notebook away from sources of
electrical interference, such as televisions, unshielded
speakers, microwaves, fluorescent lights, and metal
beams or shelves.
The display has pixels that are always dark or too bright
• This condition is normal and inherent in the TFT
technology used in active-matrix LCD screens.
Gateway’s inspection standards keep these to a
minimum. If you feel these pixels are unacceptably
numerous or dense on your display, contact Gateway
Customer Care to identify whether a repair or
replacement is justified based on the number of pixels
affected.
The display is blank
• Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see “Adjusting brightness” on page 45.
• Make sure the convertible notebook is not in Sleep or
Hibernate mode. Press the power button.
• The convertible notebook may be sending its display to
an external monitor or projector. Press FN + F4 several
times to toggle through the LCD panel, an external
monitor or projector, or both.
To Next Page
Loading...
Need help?
General
