CHAPTER 3: Setting Up and Getting Started
20
Protecting from power source problems
During a power surge, the voltage level of electricity coming
into your convertible notebook can increase to levels far
above normal levels and cause data loss or system damage.
Protect your convertible notebook and peripheral devices by
connecting them to a surge protector, which absorbs voltage
surges and prevents them from reaching your convertible
notebook.
Connecting the dial-up modem
Your convertible notebook has a built-in 56K modem that you
can use to connect to a standard telephone line.
To connect the modem:
1 Insert one end of the modem cable into the modem
jack on your convertible notebook.
2 Insert the other end of the modem cable into a
telephone wall jack.
Warning
High voltages can enter your convertible notebook through both the
power cord and the modem connection. To protect your convertible notebook
and avoid electrical shock, use a surge protector. If you have a telephone
modem, use a surge protector that has a modem jack. If you have a cable
modem, use a surge protector that has an antenna/cable TV jack. During an
electrical storm, unplug both the surge protector and the modem.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger (for example,
No. 24 AWG) UL-listed or CSA-certified telecommunication line cord for your
dialup modem connection.
Important
The modem will not work with digital or PBX telephone lines.
To Next Page
Loading...
Need help?
General
