EasyManua.ls Logo

GE 90*-30 PLC Series - Page 245

GE 90*-30 PLC Series
447 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-6 Series 90-30 PLC Installation and Hardware Manual August 2002 GFK-0356Q
10
Series 90-30 Cable Cross-Reference
Catalog No. Description Applications
IC693CBL333 20 (0.5 meter) right angle I/O cable
connects between the left 24-pin
connector on a 32-point module and the
connector on the terminal block.
Replaces cable IC693CBL323.
Used with the Terminal Block Quick
Connect (TBQC) assemblies. See
Appendix H for a module list and cable
selection information.
IC693CBL334 20 (0.5 meter) right angle I/O cable
connects between the right 24-pin
connector on a 32-point module or the
single connector on a TBQC faceplate
and the connector on the terminal block.
Replaces cable IC693CBL323.
Used with the Terminal Block Quick
Connect (TBQC) assemblies. See
Appendix H for a module list and cable
selection information.
IC693CBL340 PTM interface cable. 19 (0.45 meter)
length. Connects between PTMPM
Series 90-30 PLC module and the
PTMIM DIN-rail mounted interface
module.
Part of IC693PTM100 assembly. This
assembly includes PTMPM module,
PTMIM interface module, and
IC693CBL340 cable. This cable also
available as separate item.
IC693CBL341 PTM interface cable. 39 (1 meter)
length. Connects between PTMPM
Series 90-30 PLC module and the
PTMIM DIN-rail mounted interface
module.
Part of IC693PTM101 assembly. This
assembly includes PTMPM module,
PTMIM interface module, and
IC693CBL341 cable. This cable also
available as separate item.
IC693CBL803 3(1 meter) redundant communications
cable.
IC800CBL001 3(1 meter) Digital Servo Command
cable connects between a DSM module
and either a digital servo amplifier or a
digital servo axis terminal block. See
the DSM user’s manuals (GFK-1464,
GFK-1742) for details.
Used with DSM modules:
IC693DSM302
IC693DSM314
IC800CBL002 10’ (3 meter) Digital Servo Command
cable connects between a DSM module
and either a digital servo amplifier or a
digital servo axis terminal block. See
the DSM user’s manuals (GFK-1464,
GFK-1742) for details.
Used with DSM modules:
IC693DSM302
IC693DSM314d

Table of Contents

Other manuals for GE 90*-30 PLC Series

Related product manuals