ActionStep
Connect the other end of the jumper tubing
to the right side of the ÄKTA ready gradient
pump tubing (placed on the the system
pump).
7
Connect the inlet manifold to the left side of the ÄKTA ready gradient pump
tubing placed on the ÄKTA ready system pump (P-201) using a TC clamp.
8
Connect the B-buffer tubing to the left side of the ÄKTA ready system pump
tubing placed on the ÄKTA ready gradient pump (P-202) inlet 7 using a TC
clamp.
9
102 ÄKTA ready Operating Instructions 28960345 AD
7 ÄKTA ready gradient
7.2 ÄKTA ready gradient flow section
To Next Page
Loading...
