2.1 Safety precautions
Introduction
ÄKTA ready is powered by mains voltage and handles materials that may be hazardous.
Before installing, operating or maintaining the system, you must be aware of the hazards
described in this manual.
The safety precautions in this section are grouped into the following categories:
•
General precautions, on page 15
•
Flammable liquids and explosive environment, on page 17
•
Personal protection, on page 16
•
Installing and moving, on page 17
•
Operation, on page 19
•
Maintenance, on page 22
General precautions
WARNING
•
Risk assessment. Perform a risk assessment for any risks due
to the process or process environment. Evaluate the effects
the use of the product and the operational processes may
have on the classification of the hazardous area. The process
might cause the area to increase or the zone classification to
change. Implement the risk reduction measures needed, includ-
ing use of personal protective equipment.
•
The customer must make sure that all installation, mainte-
nance, operation and inspection is carried out by qualified
personnel who are adequately trained, understand and adhere
to local regulations and the operating instructions, and have
a thorough knowledge of the product and the entire process.
•
Do not operate the product in any other way than described
in the user documentation.
•
Do not use ÄKTA ready if it is not working properly, or if it has
suffered any damage, for example:
-
damage to the power cord or its plug
ÄKTA ready Operating Instructions 28960345 AD 15
2 Safety instructions
2.1 Safety precautions
To Next Page
Loading...
