7 ÄKTA ready gradient
About this chapter
This chapter provides an overview of the details of ÄKTA ready gradient. It describes
how to install the ÄKTA ready gradient flow section. It also provides an instruction how
to calibrate the pump.
Gradient linearity is ±4% between 10% to 90%.
Precautions
WARNING
Before attempting to perform any of the procedures described in
this chapter, you must read and understand all contents of the
corresponding section(s) in the Section 2.1 Safety precautions, on
page 15 as listed below:
•
General precautions, on page 15
•
Flammable liquids and explosive environment, on page 17
•
Personal protection, on page 16
•
Operation, on page 19
In this chapter
This chapter contains the following sections:
See pageSection
987.1 ÄKTA ready gradient pump
997.2 ÄKTA ready gradient flow section
1037.3 Calibrate and operate the ÄKTA ready gradient pump
ÄKTA ready Operating Instructions 28960345 AD 97
7 ÄKTA ready gradient
To Next Page
Loading...
