ActionStep
Following the same general procedure as in step 3, insert also these instruc-
tions into the block:
4
•
At time 0.10, set instruction AirTrap to Bypass.
•
At time 0.20 set instruction Outlet to Outlet6.
The block is now finished. All the in-
structions are available for reviewing
in the Text pane (see figure).
If you want to modify an instruction,
select it and make the changes in the
Instructions box.
ÄKTA ready Operating Instructions 28960345 AD 155
10 Creating a method
10.2 An example of using the Method Editor
10.2.2 Block 1: Opening valves
To Next Page
Loading...
