WARNING
•
Hazardous chemicals during run. When using hazardous
chemicals, run System CIP and Column CIP to flush the entire
system tubing with distilled water, before service and mainte-
nance.
•
Disconnect power. Always disconnect power from the instru-
ment before replacing fuses.
NOTICE
Disconnect power. To prevent equipment damage, always discon-
nect the power from the product before an instrument module is
removed or installed, or a cable is connected or disconnected.
In this chapter
This chapter contains the following sections:
See pageSection
18412.1 Daily maintenance
18712.2 Yearly maintenance
19412.3 Spare parts
19512.4 Storage
ÄKTA ready Operating Instructions 28960345 AD 183
12 Maintenance
To Next Page
Loading...
