GE AKTA ready - Page 38

Components on system cabinet
— front
The drawing below shows the location of components on the ÄKTA ready cabinet. The
cabinet is shown without the cabinet door and with a flow kit mounted. (Components
of the flow kit are described in Flow kit components, on page 42.)
1
2
3
4
5
9
8
7
6
10
12
13
11
14
15
FunctionID tagComponentPart
Press button to pause an ongoing process.
Press again to continue. (See Pinch valves, on
page 48 for valve positions.)
-PAUSE/CON-
TINUE button
and alarm indi-
cator lamp
1
Lamp shows steady yellow light during pause.
Flashing yellow light indicates UNICORN
alarm.
Shows green light when system is running.
No light when system is idle (i.e., between
runs, or during pause).
-RUN indicator
lamp
2
38 ÄKTA ready Operating Instructions 28960345 AD
3 System description
3.2 Layout