6.2.
Image Measurement
This section explains how to measure an image. Image Measurement is available based on which system
you have purchased.
Measurement includes the following options.
• Calibration
• Distance
• Angle
Measurements can be applied to a saved image, a recalled image, and the current image displayed.
NOTE
Because of patient movement or measurement subject is not located in the region of
interest or inadequate calibration, measurement result may be inaccurate. Measurement
result is only for reference.
Select the “Measurement” key on the Workstation or select the “Measurement” button on the
system panel, the left monitor image is copied to the right monitor and displayed in the Measurement
screen.
Click on “Exit” button on Measurement screen, Measurement is closed. The Measurement screen also exits
To Next Page
Loading...
