Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 12-25
12.7.4. Film Cassette Holder
Film cassette holder dimension: 33.1cm x35.0cm x5.2cm for 9’’ Image Intensifier.
Film cassette dimensions: 10’’ x 12’' (24 cm x 30cm) for 9’’ Image Intensifier.
If user need install the film cassette holder, please make sure the lock handle is locked into place.
12.7.5. Video Distributor
The video distributor provides a means of viewing the images displayed on the left monitor on an external
monitor. There are two kinds of video distributor provided as option. The weight of them is 2.3±0.2kg and
1.0±0.2kg.
The DVI video connector in the Workstation console provides video from the Workstation to external
monitor. Connect the video cable to DVI interface and the external video output will be the same as the
video displayed on the left monitor.
12.7.6. Removable Filter
In some countries or regions, removable filter is required to be used in pediatric or other applications,
please use this option as requirement of local regulations. After use of the removable filter, it will reduce
the dose radiation for the patient and technician. Meantime, for the same parts imaging, the kVp and mA
may increase and tube sustainable exposure time may be shortened.
The removable filter includes two sensors and a 3.5 mm Al filter.
12.7.7. Removable Grid
In some countries or regions, removable grid is required to be used in pediatric or other applications, please
use this option as requirement of local regulations. When user conduct imaging without a removable grid,
system can obtain images with lower dose, but it may cause image blurring, image quality may be not very
good.
If user need install the removable grid, please make sure it is locked into place.
To Next Page
Loading...
