4.3.2. Footswitch and Handswitch
The X-Ray foot/handswitch offer maximum flexibility to control X-Rays generation. Switches may be used
to generate X-Rays or save images.
Before Exposure, please check and confirm the mode you selected to avoid unexpected
X-Ray Exposure.
Taking very rapid and short exposures repeatedly over an extended period of time may
cause errors to occur. Avoid continuous tapping on the X-Ray switch over long periods of
time.
Footswitch
There are 2 kinds of two-pedal footswitch. The footswitch available is determined by which you purchased.
Two-pedal Footswitch
Press the left switch labeled to produce standard fluoroscopic images.
Press the right switch labeled to produce high level fluoro or digital spot images.
Multifunctional Two-pedal Footswitch
Press the left switch labeled to produce standard fluoroscopic images.
Press the right switch labeled to produce high level fluoro or digital spot images.
Press the save button labeled to save the image displayed on the left monitor.
To Next Page
Loading...
