Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 4-13
Workstation Operations
Save
Press the “Save” key to save the left monitor image on the system disk.
After you have completed the exposure, press the “Save” key to save the last image displayed on the left
monitor to the Workstation hard-drive.
Swap
Press the “Swap” key to exchange images between the left and right monitors. Swap will copy the image to
the right monitor in the following cases: 1) only one image on the left monitor and there’s no image on the
right monitor; 2) you are taking exposure.
Mode Switch
The “Mode Switch” button is not available for this system. Invalid key sound will be given when pressing this
key.
To Next Page
Loading...
