Labels and Symbols
Page 11-2
11.1. Overview
This chapter describes labels and symbols that are located on your C-Arm and Workstation.
Two types of labels are described: warning labels and regulatory certification labels. Warning labels define
potential hazards and advise against misuse that might result in personal injury. Familiarize yourself with
these labels and their meanings in order to ensure a safe environment for both the patient and yourself.
Regulatory labels indicate that the system meets the requirements of specific governmental, medical and
industrial organizations.
Symbols are provided to visually represent concepts.
This manual is supplied only in English label, some labels may have a foreign language
equivalent that will appear on your system.
11.2. Labels and Locations
11.2.1. Labels
This label indicates the position
of the C-Arm Wig-Wag
movement handle. When the
handle is rotated to dashed line
position, the Wig-Wag brake is
released. When the handle is in
solid line position, the Wig-Wag
brake is locked.
This label indicates the position
of the C-Arm rotation
movement brake handle. When
the handle is rotated to the
dashed line position, the brake
is released. When the handle is
in solid line position, the brake
is locked.
This symbol indicates the
position of the C-Arm rotation
movement brake handle. When
the handle is rotated to the
dashed line position, the brake
is released. When the handle is
in solid line position, the brake
is locked.
To Next Page
Loading...
