Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 11-17
11.3. Symbols
Be familiar with the following symbols that may appear on equipment and schematics, so you can safely
maintain and operate the system:
This symbol identifies areas where
hazardous voltages may be present.
Use appropriate safety precautions.
This symbol identifies an earth ground
connection that is necessary to
maintain grounding throughout the
system.
This X-Ray Source symbol can be found
on the X-Ray generator. It indicates the
location of the X-Ray source and the
controls used to produce ionizing
X-Radiation. Use appropriate
precautions and protective equipment
when using the system and at all times
when X-Rays are present.
This symbol is used to identify controls
that will produce ionizing X-Radiation
when activated. Always use
appropriate precautions when
generating X-Rays.
Attention, refer to accompanying
documentation for information. You
can refer to this manual for the
operation instructions.
This symbol indicates Type B applied
parts. User is protected against electric
shock by protective earth grounding of
all accessible conductive parts or the
use of non-conductive parts.
This symbol means that there is
ionization radiation.