GE Brivo OEC 715 - Page 134

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 6-27
6.3.5. DICOM Print
Use these steps to print on a DICOM printer.
1. Make sure the DICOM Print server is setup successfully.
2. Press “Image Directory” key on the Workstation membrane keyboard. Select DICOM print
tab.
3. Choose a layout format.
4. To add an image to the queue box, select the preview image and then click the queue box. You can
continue to select images and load them into the queue until all available positions are filled.
If you select a preview image and then click a box already containing an image, you will replace the
existing image with the preview image you selected most recently.
5. Select the “Print” button.
6. As images are sent to the printer, the print in progress screen is displayed. To cancel the print process,
click the “Cancel” button on the screen.